- 28 Jun, 2005 2 commits
-
-
Dominik Brodowski authored
Add pcmcia_device_id table. Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Dominik Brodowski authored
Add pcmcia_device_id table. Signed-off-by:
-
- 27 Jun, 2005 2 commits
-
-
Benjamin Herrenschmidt authored
This patch removes CONFIG_PMAC_PBOOK (PowerBook support). This is now split into CONFIG_PMAC_MEDIABAY for the actual hotswap bay that some powerbooks have, CONFIG_PM for power management related code, and just left out of any CONFIG_* option for some generally useful stuff that can be used on non-laptops as well. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Tobias Klauser authored
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by:
Domen Puncer <domen@coderock.org>
-
- 25 Jun, 2005 10 commits
-
-
Tobias Klauser authored
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by:
-
Tobias Klauser authored
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by:
-
Tobias Klauser authored
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by:
-
Tobias Klauser authored
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by:
-
Adrian Bunk authored
SOUND_PRIME (for OSS) is a tristate. This doesn't make much sense if most users are checking for SOUND_PRIME!=0. This patch changes the semantics of SOUND_PRIME to being a limit for all OSS modules, IOW: SOUND_PRIME=m does now say that all OSS drivers can only be modular. As a side effect, since SOUND_PRIME already depends on SOUND, there's no longer a reason for drivers depending on SOUND_PRIME to additionally depend on SOUND. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
The Coverity checker found that sscape_sb_enable never get's assigned any value different from 0, and therefore some code paths are impossible. This patch removes this variable and the dead code paths. Signed-off-by:
-
Adrian Bunk authored
This patch removes #if's for kernel 2.2 . Signed-off-by:
-
Dave Jones authored
static declaration follows non static Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Adrian Bunk authored
This patch contains cleanups including the following: - make needlessly global code static Signed-off-by:
-
Jesper Juhl authored
[PATCH] remove redundant NULL checks before kfree() in sound/ and avoid casting pointers about to be kfree()'ed Checking a pointer for NULL before calling kfree() on it is redundant, kfree() deals with NULL pointers just fine. This patch removes such checks from sound/ This patch also makes another, but closely related, change. It avoids casting pointers about to be kfree()'ed. Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
- 23 Jun, 2005 1 commit
-
-
Paulo Marques authored
This patch creates a new kstrdup library function and changes the "local" implementations in several places to use this function. Most of the changes come from the sound and net subsystems. The sound part had already been acknowledged by Takashi Iwai and the net part by David S. Miller. I left UML alone for now because I would need more time to read the code carefully before making changes there. Signed-off-by:
Paulo Marques <pmarques@grupopie.com> Signed-off-by:
-
- 22 Jun, 2005 25 commits
-
-
James Courtier-Dutton authored
EMU10K1/EMU10K2 driver Signed-off-by:James Courtier-Dutton <James@superbug.co.uk>
-
Takashi Iwai authored
VIA82xx driver Added dxs_support entry for Soltek SL-K8Tpro-939. Signed-off-by:Takashi Iwai <tiwai@suse.de>
-
Matt authored
HDA Codec driver Adds SPDIF in/out support to the SigmaTel HDA codecs. Now builds the input mux control element names from the defcfg regs. Signed-off-by:
Matt <matt@embeddedalley.com> Signed-off-by:
-
Takashi Iwai authored
VIA82xx driver Fixed the info text about dxs_support option (suggest dxs_support=5). Signed-off-by: -
Takashi Iwai authored
Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver - Fix some invalid configurations, typos in the last patch - Make init_verbs chainable, so that different configs can share the same init_verbs - Reorder and clean up the source codes in patch_realtek.c - Add the pin default configuration parser, used commonly in cmedia and realtek patch codes. - Add 'auto' model to ALC880 for auto-configuration from BIOS Use this model as default, and 3-stack as fallback Signed-off-by: -
Takashi Iwai authored
Control Midlevel Add const prefix to snd_kcontrol_new_t pointer for better protection. Signed-off-by: -
Takashi Iwai authored
HDA Codec driver,HDA Intel driver Merged the work of pshou <pshou@realtek.com.tw> for the support of more models with ALC codecs: ALC880 ASUS, Uniwill, FSC1734, generic 6-stack, and ALC260 HP. Tests with the real hardwares are appreciated. The codec patch is cleaned up: The preset configuration of codecs are stored in the table and copied to the spec instance. Added/fixed comments. Signed-off-by: -
Takashi Iwai authored
HDA Codec driver Allow sub_device=0 in board config check. This means that every device with the given sub vendor ID will match. Signed-off-by: -
Takashi Iwai authored
HDA Codec driver Clean up and fix ALC-codec support code. The last addition of bound volume is fixed now to handle correctly the bound 'mute switches'. The analog loopback should work better. The init verbs are fixed together with this change. The numbers are replaced with macros for better readability. Signed-off-by: -
Takashi Iwai authored
HDA Codec driver Feed front signals to all surround channels if no data is given for surround channels. It seems that CLFE works as expected (only center outputs) even if connected from the front line - at least on my test system. If this change causes problems on other system (e.g. only the left channel is transferred to the center channel), please let me know... Signed-off-by: -
Takashi Iwai authored
HDA generic driver Print all AMP IN values when multiple nodes are connected. Signed-off-by: -
Takashi Iwai authored
Trident driver Disable MPU401 support on SIS7018 since it results in kernel freeze. Signed-off-by: -
Takashi Iwai authored
HDA Codec driver Fix the analog loopback volumes of ALC codecs. Signed-off-by: -
Takashi Iwai authored
HDA Codec driver Fix the PCM mixer switch for AD1986a (it was a typo). Signed-off-by: -
Takashi Iwai authored
HDA Codec driver Fixed the handling of amp cache in hda-codec driver. The confliction of cache values with different indices should be fixed now. Signed-off-by: -
Jaroslav Kysela authored
VIA82xx driver As the original reporter noted, the NO_VRA must be used for loud volumes. Signed-off-by:Jaroslav Kysela <perex@suse.cz>
-
James Courtier-Dutton authored
CA0106 driver Signed-off-by: -
Takashi Iwai authored
HDSPM driver,PCI drivers,RME9652 driver Added RME Hammerfall DSP MADI driver by Winfried Ritsch. (Moved from alsa-driver tree to mainline.) Signed-off-by: -
Christoph Schulz authored
CS4236+ driver Background: The card/chipset supports an external MIDI interrupt. By default, this interrupt isn't used (because the isapnp mechanism chooses a configuration without an assigned interrupt). If the user wishes to explicitly select an interrupt via the mpu_irq parameter for such a configured device, it doesn't work: The driver always shows: isapnp MPU: port=0x330, irq=-1 (note the 'irq=-1') Problem: The driver only allows to set the irq if pnp_irq_valid returns true for this particular pnp device. This, however, is only true if an interrupt has already been assigned (pnp_valid_irq returns true if the flag IORESOURCE_IRQ is set and IORESOURCE_UNSET is not set). If no interrupt has been assigned so far, IORESOURCE_UNSET is set and pnp_irq_valid returns false, thereby inhibiting the selection of a valid irq. Solution: Don't check for a valid (= already assigned) irq at the point of calling pnp_resource_change. Tested successfully on Linux 2.6.11. Signed-off-by:
-
Jaroslav Kysela authored
ALSA<-OSS emulation The problem was negative/wrong result (info.bytes) in a specific condition at playback startup. Signed-off-by: -
Takashi Iwai authored
Intel8x0 driver Added ac97_quirk for FSC T3010. Signed-off-by: -
Jaroslav Kysela authored
ALSA<-OSS emulation The problem was negative result (info.bytes) in a specific condition at playback startup. Signed-off-by: -
Takashi Iwai authored
PCM Midlevel Fix semaphore races between PCM drain and other ops. Signed-off-by: -
Takashi Iwai authored
HDA Intel driver Fixed Oops in the error path from probe function of snd-hda-intel driver. Signed-off-by: -
Takashi Iwai authored
Documentation,Memalloc module,RME HDSP driver,RME9652 driver Add the write support to snd-page-alloc proc file for buffer pre-allocation. Removed the pre-allocation codes via module options. Signed-off-by:
-
