Skip to content

GitLab

Commit 73ecf3a6 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...
parents b9da0571 cd3ecad1
Hide whitespace changes
Inline Side-by-side
Showing with 196 additions and 873 deletions
Documentation/devices.txt
View file @ 73ecf3a6
......@@ -239,6 +239,7 @@ Your cooperation is appreciated.
0 = /dev/tty Current TTY device
1 = /dev/console System console
2 = /dev/ptmx PTY master multiplex
3 = /dev/ttyprintk User messages via printk TTY device
64 = /dev/cua0 Callout device for ttyS0
...
255 = /dev/cua191 Callout device for ttyS191
......
Documentation/filesystems/proc.txt
View file @ 73ecf3a6
......@@ -1075,6 +1075,7 @@ Table 1-11: Files in /proc/tty
drivers list of drivers and their usage
ldiscs registered line disciplines
driver/serial usage statistic and status of single tty lines
consoles registered system console lines
..............................................................................
To see which tty's are currently in use, you can simply look into the file
......@@ -1093,6 +1094,37 @@ To see which tty's are currently in use, you can simply look into the file
/dev/tty /dev/tty 5 0 system:/dev/tty
unknown /dev/tty 4 1-63 console
To see which character device lines are currently used for the system console
/dev/console, you may simply look into the file /proc/tty/consoles:
> cat /proc/tty/consoles
tty0 -WU (ECp) 4:7
ttyS0 -W- (Ep) 4:64
The columns are:
device name of the device
operations R = can do read operations
W = can do write operations
U = can do unblank
flags E = it is enabled
C = it is prefered console
B = it is primary boot console
p = it is used for printk buffer
b = it is not a TTY but a Braille device
a = it is safe to use when cpu is offline
* = it is standard input of the reading process
major:minor major and minor number of the device separated by a colon
If the reading process holds /dev/console open at the regular standard input
stream the active device will be marked by an asterisk:
> cat /proc/tty/consoles < /dev/console
tty0 -WU (ECp*) 4:7
ttyS0 -W- (Ep) 4:64
> tty
/dev/pts/3
1.8 Miscellaneous kernel statistics in /proc/stat
-------------------------------------------------
......
MAINTAINERS
View file @ 73ecf3a6
......@@ -157,9 +157,11 @@ S: Maintained
F: drivers/net/r8169.c
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
S: Orphan
S: Maintained
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
F: drivers/serial/8250*
F: include/linux/serial_8250.h
......@@ -3353,6 +3355,12 @@ F: fs/jbd*/
F: include/linux/ext*jbd*.h
F: include/linux/jbd*.h
JSM Neo PCI based serial card
M: Breno Leitao <leitao@linux.vnet.ibm.com>
L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/serial/jsm/
K8TEMP HARDWARE MONITORING DRIVER
M: Rudolf Marek <r.marek@assembler.cz>
L: lm-sensors@lm-sensors.org
......
arch/arm/include/asm/ioctls.h
View file @ 73ecf3a6
#ifndef __ASM_ARM_IOCTLS_H
#define __ASM_ARM_IOCTLS_H
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCGRS485 0x542E
#define TIOCSRS485 0x542F
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif
arch/avr32/include/asm/ioctls.h
View file @ 73ecf3a6
#ifndef __ASM_AVR32_IOCTLS_H
#define __ASM_AVR32_IOCTLS_H
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define TIOCGRS485 0x542E
#define TIOCSRS485 0x542F
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x5460
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif /* __ASM_AVR32_IOCTLS_H */
arch/cris/include/asm/ioctls.h
View file @ 73ecf3a6
#ifndef __ARCH_CRIS_IOCTLS_H__
#define __ARCH_CRIS_IOCTLS_H__
/* verbatim copy of asm-i386/ioctls.h */
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x5460
#define TIOCSERSETRS485 0x5461 /* enable rs-485 (deprecated) */
#define TIOCSERWRRS485 0x5462 /* write rs-485 */
#define TIOCSRS485 0x5463 /* enable rs-485 */
#define TIOCGRS485 0x542E /* get rs-485 */
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif
arch/frv/include/asm/ioctls.h
View file @ 73ecf3a6
#ifndef __ASM_IOCTLS_H__
#define __ASM_IOCTLS_H__
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif /* __ASM_IOCTLS_H__ */
arch/h8300/include/asm/ioctls.h
View file @ 73ecf3a6
#ifndef __ARCH_H8300_IOCTLS_H__
#define __ARCH_H8300_IOCTLS_H__
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif /* __ARCH_H8300_IOCTLS_H__ */
arch/ia64/hp/sim/simserial.c
View file @ 73ecf3a6
......@@ -395,7 +395,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
{
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
(cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
(cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
......@@ -433,16 +433,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
case TIOCMIWAIT:
printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n");
return 0;
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT:
printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n");
return 0;
case TIOCSERGWILD:
case TIOCSERSWILD:
/* "setserial -W" is called in Debian boot */
......
arch/ia64/include/asm/ioctls.h
View file @ 73ecf3a6
#ifndef _ASM_IA64_IOCTLS_H
#define _ASM_IA64_IOCTLS_H
/*
* Based on <asm-i386/ioctls.h>
*
* Modified 1998, 1999, 2002
* David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
*/
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x5460
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif /* _ASM_IA64_IOCTLS_H */
arch/m32r/include/asm/ioctls.h
View file @ 73ecf3a6
#ifndef __ARCH_M32R_IOCTLS_H__
#define __ARCH_M32R_IOCTLS_H__
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x5460
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif /* __ARCH_M32R_IOCTLS_H__ */
arch/mips/alchemy/common/platform.c
View file @ 73ecf3a6
......@@ -24,6 +24,33 @@
#include <prom.h>
static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
unsigned int old_state)
{
switch (state) {
case 0:
if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
/* power-on sequence as suggested in the databooks */
__raw_writel(0, port->membase + UART_MOD_CNTRL);
wmb();
__raw_writel(1, port->membase + UART_MOD_CNTRL);
wmb();
}
__raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */
wmb();
serial8250_do_pm(port, state, old_state);
break;
case 3: /* power off */
serial8250_do_pm(port, state, old_state);
__raw_writel(0, port->membase + UART_MOD_CNTRL);
wmb();
break;
default:
serial8250_do_pm(port, state, old_state);
break;
}
}
#define PORT(_base, _irq) \
{ \
.mapbase = _base, \
......@@ -33,6 +60,7 @@
.flags = UPF_SKIP_TEST | UPF_IOREMAP | \
UPF_FIXED_TYPE, \
.type = PORT_16550A, \
.pm = alchemy_8250_pm, \
}
static struct plat_serial8250_port au1x00_uart_data[] = {
......
arch/mips/alchemy/common/power.c
View file @ 73ecf3a6
......@@ -49,11 +49,6 @@
* We only have to save/restore registers that aren't otherwise
* done as part of a driver pm_* function.
*/
static unsigned int sleep_uart0_inten;
static unsigned int sleep_uart0_fifoctl;
static unsigned int sleep_uart0_linectl;
static unsigned int sleep_uart0_clkdiv;
static unsigned int sleep_uart0_enable;
static unsigned int sleep_usb[2];
static unsigned int sleep_sys_clocks[5];
static unsigned int sleep_sys_pinfunc;
......@@ -62,22 +57,6 @@ static unsigned int sleep_static_memctlr[4][3];
static void save_core_regs(void)
{
extern void save_au1xxx_intctl(void);
extern void pm_eth0_shutdown(void);
/*
* Do the serial ports.....these really should be a pm_*
* registered function by the driver......but of course the
* standard serial driver doesn't understand our Au1xxx
* unique registers.
*/
sleep_uart0_inten = au_readl(UART0_ADDR + UART_IER);
sleep_uart0_fifoctl = au_readl(UART0_ADDR + UART_FCR);
sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR);
sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
au_sync();
#ifndef CONFIG_SOC_AU1200
/* Shutdown USB host/device. */
sleep_usb[0] = au_readl(USB_HOST_CONFIG);
......@@ -175,20 +154,6 @@ static void restore_core_regs(void)
au_writel(sleep_static_memctlr[3][0], MEM_STCFG3);
au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);
/*
* Enable the UART if it was enabled before sleep.
* I guess I should define module control bits........
*/
if (sleep_uart0_enable & 0x02) {
au_writel(0, UART0_ADDR + UART_MOD_CNTRL); au_sync();
au_writel(1, UART0_ADDR + UART_MOD_CNTRL); au_sync();
au_writel(3, UART0_ADDR + UART_MOD_CNTRL); au_sync();
au_writel(sleep_uart0_inten, UART0_ADDR + UART_IER); au_sync();
au_writel(sleep_uart0_fifoctl, UART0_ADDR + UART_FCR); au_sync();
au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync();
au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync();
}
}
void au_sleep(void)
......
arch/mn10300/include/asm/ioctls.h
View file @ 73ecf3a6
#ifndef _ASM_IOCTLS_H
#define _ASM_IOCTLS_H
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T', 0x2A, struct termios2)
#define TCSETS2 _IOW('T', 0x2B, struct termios2)
#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number
* (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T', 0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x5460
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif /* _ASM_IOCTLS_H */
arch/s390/include/asm/ioctls.h
View file @ 73ecf3a6
/*
* include/asm-s390/ioctls.h
*
* S390 version
*
* Derived from "include/asm-i386/ioctls.h"
*/
#ifndef __ARCH_S390_IOCTLS_H__
#define __ARCH_S390_IOCTLS_H__
#include <asm/ioctl.h>
/* 0x54 is just a magic number to make these relatively unique ('T') */
#define TCGETS 0x5401
#define TCSETS 0x5402
#define TCSETSW 0x5403
#define TCSETSF 0x5404
#define TCGETA 0x5405
#define TCSETA 0x5406
#define TCSETAW 0x5407
#define TCSETAF 0x5408
#define TCSBRK 0x5409
#define TCXONC 0x540A
#define TCFLSH 0x540B
#define TIOCEXCL 0x540C
#define TIOCNXCL 0x540D
#define TIOCSCTTY 0x540E
#define TIOCGPGRP 0x540F
#define TIOCSPGRP 0x5410
#define TIOCOUTQ 0x5411
#define TIOCSTI 0x5412
#define TIOCGWINSZ 0x5413
#define TIOCSWINSZ 0x5414
#define TIOCMGET 0x5415
#define TIOCMBIS 0x5416
#define TIOCMBIC 0x5417
#define TIOCMSET 0x5418
#define TIOCGSOFTCAR 0x5419
#define TIOCSSOFTCAR 0x541A
#define FIONREAD 0x541B
#define TIOCINQ FIONREAD
#define TIOCLINUX 0x541C
#define TIOCCONS 0x541D
#define TIOCGSERIAL 0x541E
#define TIOCSSERIAL 0x541F
#define TIOCPKT 0x5420
#define FIONBIO 0x5421
#define TIOCNOTTY 0x5422
#define TIOCSETD 0x5423
#define TIOCGETD 0x5424
#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
#define TCGETS2 _IOR('T',0x2A, struct termios2)
#define TCSETS2 _IOW('T',0x2B, struct termios2)
#define TCSETSW2 _IOW('T',0x2C, struct termios2)
#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
#define FIOASYNC 0x5452
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
#define TIOCSERSWILD 0x5455
#define TIOCGLCKTRMIOS 0x5456
#define TIOCSLCKTRMIOS 0x5457
#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
#define TIOCSERGETLSR 0x5459 /* Get line status register */
#define TIOCSERGETMULTI 0x545A /* Get multiport config */
#define TIOCSERSETMULTI 0x545B /* Set multiport config */
#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
/* Used for packet mode */
#define TIOCPKT_DATA 0
#define TIOCPKT_FLUSHREAD 1
#define TIOCPKT_FLUSHWRITE 2
#define TIOCPKT_STOP 4
#define TIOCPKT_START 8
#define TIOCPKT_NOSTOP 16
#define TIOCPKT_DOSTOP 32
#define TIOCPKT_IOCTL 64
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
#include <asm-generic/ioctls.h>
#endif
drivers/char/Kconfig
View file @ 73ecf3a6
......@@ -493,6 +493,21 @@ config LEGACY_PTY_COUNT
When not in use, each legacy PTY occupies 12 bytes on 32-bit
architectures and 24 bytes on 64-bit architectures.
config TTY_PRINTK
bool "TTY driver to output user messages via printk"
depends on EMBEDDED
default n
---help---
If you say Y here, the support for writing user messages (i.e.
console messages) via printk is available.
The feature is useful to inline user messages with kernel
messages.
In order to use this feature, you should output user messages
to /dev/ttyprintk or redirect console to this TTY.
If unsure, say N.
config BRIQ_PANEL
tristate 'Total Impact briQ front panel driver'
depends on PPC_CHRP
......
drivers/char/Makefile
View file @ 73ecf3a6
......@@ -12,6 +12,7 @@ obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o t
obj-y += tty_mutex.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
obj-$(CONFIG_TTY_PRINTK) += ttyprintk.o
obj-y += misc.o
obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o selection.o keyboard.o
obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o
......
drivers/char/amiserial.c
View file @ 73ecf3a6
......@@ -1263,6 +1263,36 @@ static int rs_break(struct tty_struct *tty, int break_state)
return 0;
}
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
static int rs_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct async_struct *info = tty->driver_data;
struct async_icount cnow;
unsigned long flags;
local_irq_save(flags);
cnow = info->state->icount;
local_irq_restore(flags);
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
static int rs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
......@@ -1332,31 +1362,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
}
/* NOTREACHED */
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT:
local_irq_save(flags);
cnow = info->state->icount;
local_irq_restore(flags);
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
icount.dcd = cnow.dcd;
icount.rx = cnow.rx;
icount.tx = cnow.tx;
icount.frame = cnow.frame;
icount.overrun = cnow.overrun;
icount.parity = cnow.parity;
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
if (copy_to_user(argp, &icount, sizeof(icount)))
return -EFAULT;
return 0;
case TIOCSERGWILD:
case TIOCSERSWILD:
/* "setserial -W" is called in Debian boot */
......@@ -1958,6 +1963,7 @@ static const struct tty_operations serial_ops = {
.wait_until_sent = rs_wait_until_sent,
.tiocmget = rs_tiocmget,
.tiocmset = rs_tiocmset,
.get_icount = rs_get_icount,
.proc_fops = &rs_proc_fops,
};
......
drivers/char/cyclades.c
View file @ 73ecf3a6
......@@ -2790,29 +2790,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT: {
struct serial_icounter_struct sic = { };
spin_lock_irqsave(&info->card->card_lock, flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->card->card_lock, flags);
sic.cts = cnow.cts;
sic.dsr = cnow.dsr;
sic.rng = cnow.rng;
sic.dcd = cnow.dcd;
sic.rx = cnow.rx;
sic.tx = cnow.tx;
sic.frame = cnow.frame;
sic.overrun = cnow.overrun;
sic.parity = cnow.parity;
sic.brk = cnow.brk;
sic.buf_overrun = cnow.buf_overrun;
if (copy_to_user(argp, &sic, sizeof(sic)))
ret_val = -EFAULT;
break;
}
default:
ret_val = -ENOIOCTLCMD;
}
......@@ -2823,6 +2800,31 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
return ret_val;
} /* cy_ioctl */
static int cy_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *sic)
{
struct cyclades_port *info = tty->driver_data;
struct cyclades_icount cnow; /* Used to snapshot */
unsigned long flags;
spin_lock_irqsave(&info->card->card_lock, flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->card->card_lock, flags);
sic->cts = cnow.cts;
sic->dsr = cnow.dsr;
sic->rng = cnow.rng;
sic->dcd = cnow.dcd;
sic->rx = cnow.rx;
sic->tx = cnow.tx;
sic->frame = cnow.frame;
sic->overrun = cnow.overrun;
sic->parity = cnow.parity;
sic->brk = cnow.brk;
sic->buf_overrun = cnow.buf_overrun;
return 0;
}
/*
* This routine allows the tty driver to be notified when
* device's termios settings have changed. Note that a
......@@ -4084,6 +4086,7 @@ static const struct tty_operations cy_ops = {
.wait_until_sent = cy_wait_until_sent,
.tiocmget = cy_tiocmget,
.tiocmset = cy_tiocmset,
.get_icount = cy_get_icount,
.proc_fops = &cyclades_proc_fops,
};
......
drivers/char/ip2/ip2main.c
View file @ 73ecf3a6
......@@ -184,6 +184,8 @@ static void ip2_hangup(PTTY);
static int ip2_tiocmget(struct tty_struct *tty, struct file *file);
static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int ip2_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount);
static void set_irq(int, int);
static void ip2_interrupt_bh(struct work_struct *work);
......@@ -456,6 +458,7 @@ static const struct tty_operations ip2_ops = {
.hangup = ip2_hangup,
.tiocmget = ip2_tiocmget,
.tiocmset = ip2_tiocmset,
.get_icount = ip2_get_icount,
.proc_fops = &ip2_proc_fops,
};
......@@ -2130,7 +2133,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
i2ChanStrPtr pCh = DevTable[tty->index];
i2eBordStrPtr pB;
struct async_icount cprev, cnow; /* kernel counter temps */
struct serial_icounter_struct __user *p_cuser;
int rc = 0;
unsigned long flags;
void __user *argp = (void __user *)arg;
......@@ -2298,34 +2300,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
return rc;
break;
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for RI where
* only 0->1 is counted. The controller is quite capable of counting
* both, but this done to preserve compatibility with the standard
* serial driver.
*/
case TIOCGICOUNT:
ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc );
write_lock_irqsave(&pB->read_fifo_spinlock, flags);
cnow = pCh->icount;
write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
p_cuser = argp;
rc = put_user(cnow.cts, &p_cuser->cts);
rc = put_user(cnow.dsr, &p_cuser->dsr);
rc = put_user(cnow.rng, &p_cuser->rng);
rc = put_user(cnow.dcd, &p_cuser->dcd);
rc = put_user(cnow.rx, &p_cuser->rx);
rc = put_user(cnow.tx, &p_cuser->tx);
rc = put_user(cnow.frame, &p_cuser->frame);
rc = put_user(cnow.overrun, &p_cuser->overrun);
rc = put_user(cnow.parity, &p_cuser->parity);
rc = put_user(cnow.brk, &p_cuser->brk);
rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
break;
/*
* The rest are not supported by this driver. By returning -ENOIOCTLCMD they
* will be passed to the line discipline for it to handle.
......@@ -2350,6 +2324,46 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
return rc;
}
static int ip2_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
i2ChanStrPtr pCh = DevTable[tty->index];
i2eBordStrPtr pB;
struct async_icount cnow; /* kernel counter temp */
unsigned long flags;
if ( pCh == NULL )
return -ENODEV;
pB = pCh->pMyBord;
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for RI where
* only 0->1 is counted. The controller is quite capable of counting
* both, but this done to preserve compatibility with the standard
* serial driver.
*/
write_lock_irqsave(&pB->read_fifo_spinlock, flags);
cnow = pCh->icount;
write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
/******************************************************************************/
/* Function: GetSerialInfo() */
/* Parameters: Pointer to channel structure */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment